Skip to content Skip to sidebar Skip to footer

How to Get Adhesive on Popsocets to Work Again

Download Commodity

Download Article

Popsockets are ane of many trendy items to hit the scene, and for expert reason. If yous ain one, you lot know how fun it is to use! Once attached to your telephone or tablet, you tin can fiddle with the acme of a popsocket by pulling it in and out. However, you may eventually desire to remove your popsocket and stick it somewhere else. Doing this is very easy. All you have to practice is slide your fingernails underneath the base and tug lightly.

  1. one

    Push button the pinnacle of the popsocket downwards if it'south expanded. Don't try to remove the popsocket from your device while it is still expanded. The popsocket could potentially detach from its base during the removal procedure.

  2. ii

    Work your fingernails nether the base of operations of the popsocket. Press your fingernails against the sides of the popsocket'south base and push until you tin experience them sliding underneath. You don't need to push button very far—but plenty until you take a proficient grasp on the popsocket. You should already be able to experience the base of operations of the popsocket pulling away from your phone.[ane]

    • Slide a few inches of dental floss nether your popsocket if your fingernails won't fit under the base.

    Advertisement

  3. three

    Pull the popsocket off of your telephone slowly. Grip the popsocket lightly as y'all pull. Work slowly and gently until the popsocket comes off. Try peeling the popsocket off, starting from 1 side and pulling toward the other.[2]

    Advertisement

  1. i

    Run the base of the popsocket under cold h2o for 3 seconds. Your popsocket is modest and already very viscid, so you won't demand a lot of h2o to clean information technology and aid it restick. Also much water could lengthen its drying time by the xv minute limit and ruin its stickiness.

  2. 2

    Allow the popsocket dry for effectually 10 minutes. Get out your popsocket out in the open air to dry naturally. Lay it on a paper or cloth towel with the viscous side facing upwardly.

    • Avoid letting your popsocket sit out for any longer than 15 minutes. Otherwise, it will lose its ability to stick.
    • If your popsocket yet isn't dry out after 10 minutes, wipe the base gently with a newspaper towel.
  3. iii

    Stick the popsocket dorsum onto your telephone or some other apartment surface. Any clean, flat surface will do. Nevertheless, continue in mind that a popsocket may not stick as well to surfaces made from leather or silicone, or waterproof surfaces. Mirrors, windows, tablets, and smartphones are the all-time surfaces to attach a popsocket to.

    • Permit your popsocket residual for around 1 hour before expanding or closing it. This will requite it enough fourth dimension to fully adhere to your phone again.

    Advertisement

Add New Question

  • Question

    Is it safe to throw away my PopSocket later on information technology'due south been used?

    wikiHow Staff Editor

    This answer was written past one of our trained team of researchers who validated it for accuracy and comprehensiveness.

    wikiHow Staff Editor

    wikiHow Staff Editor

    Staff Respond

    Yes, it is prophylactic to throw away your PopSocket. Endeavour to reuse information technology equally much as possible (it should terminal for at to the lowest degree 100 times removal and reattachment and around 12,000 times of expansion and collapse co-ordinate to the manufacturer), to make the most of it and go along it out of landfill that little chip longer. A quick search of the PopSockets website as of April 2022 failed to produce an answer as to the product'due south ability to be recycled, perhaps email them if you lot wish to find out.

  • Question

    Can I use a PopSocket in the automobile?

    wikiHow Staff Editor

    This respond was written past one of our trained squad of researchers who validated it for accuracy and comprehensiveness.

    wikiHow Staff Editor

    wikiHow Staff Editor

    Staff Answer

    Aye, there is a special automobile vent mount that tin can be purchased and attached to an air vent of your car. One time in place, simply slide the PopSocket into the mount and it'll hold your telephone in place.

  • Question

    Can y'all reuse a PopSocket?

    wikiHow Staff Editor

    This reply was written past one of our trained team of researchers who validated it for accurateness and comprehensiveness.

    wikiHow Staff Editor

    wikiHow Staff Editor

    Staff Respond

    Yes, you can reuse a PopSocket; the manufacturer claims information technology can be reused up to 100 times. After removing the PopSocket, take care to reattach it within 15 minutes; oherwise, leaving it exposed to air tin dry out out the gel. Check the stickiness of the grip before reusing; if it seems less sticky, this can be reactivated by dipping the grip into a fiddling water, so leaving the PopSocket on a dish to air dry for about x minutes. Then it'll be ready to reattach to your phone or other surface.

  • Question

    Are PopSockets waterproof?

    wikiHow Staff Editor

    This answer was written past 1 of our trained team of researchers who validated it for accuracy and comprehensiveness.

    wikiHow Staff Editor

    wikiHow Staff Editor

    Staff Reply

    Yes, PopSockets are waterproof. They are made from a mix of polyurethane, polycarbonate and TPU, which ensures they're waterproof. However, while the PopSocket is waterproof, your phone isn't, so be careful when placing the phone near h2o.

  • Question

    What is the purpose of a PopSocket?

    wikiHow Staff Editor

    This answer was written by ane of our trained team of researchers who validated it for accuracy and comprehensiveness.

    wikiHow Staff Editor

    wikiHow Staff Editor

    Staff Answer

    A PopSocket is basically a pocket-sized stand up or a grip for your phone or tablet device. Once the PopSocket is in identify (or y'all tin add two to a larger device, if needed), information technology allows you to balance the phone on surfaces or grip the telephone with ease. Information technology too has a gap suitable for wrapping your earbuds effectually when they're non in use, to prevent them from tangling.

  • Question

    How do you prepare a PopSocket that won't stick?

    wikiHow Staff Editor

    This answer was written by ane of our trained squad of researchers who validated it for accurateness and comprehensiveness.

    wikiHow Staff Editor

    wikiHow Staff Editor

    Staff Answer

    Dip the grip of the PopSocket into a little water for a few seconds to reactivate the stickiness, then let it dry out for near 10 minutes before reattaching. If this fails to piece of work, it's possible the PopSocket has been reused so many times it's no longer able to be reused (the manufacturer suggests is can be removed and reattached at to the lowest degree 100 times earlier information technology stops working).

  • Question

    Can I reattach it to some other case?

    Blue Dolfin (BlueDolfin2004)

    Blue Dolfin (BlueDolfin2004)

    Community Answer

    Yeah, unless the example is leather, waterproof, or made of rubber/silicone, then it won't hold as well if at all.

  • Question

    My popsocket but won't come off. I've tried using thread because there's no dental floss in my business firm, but it didn't piece of work. What can I do?

    Zhongli, Archon of Liyue (Aasim)

    Zhongli, Archon of Liyue (Aasim)

    Community Respond

    If you are having problem removing popsocket, then you can use tools such as a pair of pair of scissors or a razor to wedge underneath the adhesive. Just be careful not to cut yourself!

  • Question

    How tin I remove it with short nails and without dental floss?

    Community Answer

    I slid my credit card betwixt the phone and PopSocket and it worked great.

  • Question

    What do I practise if my PopSocket popped off its base? How practice I reattach information technology?

    Community Answer

    Take the top and insert one tab in the aligning pigsty, the echo. On the last hole, utilise your fingernails to pull open the base a flake and it should be working again.

Prove more answers

Enquire a Question

200 characters left

Include your electronic mail address to become a message when this question is answered.

Submit

Advertizing

Video

  • If your nails aren't long enough or if you're worried about them breaking, employ a paper prune or safety pin.

  • Don't worry well-nigh aligning the graphic on top of your popsocket as y'all reposition information technology. Y'all tin can fix the graphic's positioning by twisting the meridian of the popsocket once you reattach it.[3]

Thank you for submitting a tip for review!

Advertizing

About This Article

Article Summary Ten

If y'all need to remove a popsocket from your telephone, push down on the summit of the popsocket to ensure it'southward not expanded. Piece of work your fingernails under the base of the popsocket, and then slowly pare the popsocket off of your telephone. If your fingernails won't fit, endeavor sliding a few inches of dental floss nether the popsocket instead. Continue reading to larn how to make clean and reattach the popsocket!

Did this summary help you?

Thanks to all authors for creating a folio that has been read 590,785 times.

Is this commodity up to engagement?

haysinclaboy.blogspot.com

Source: https://www.wikihow.com/Remove-a-Popsocket

Post a Comment for "How to Get Adhesive on Popsocets to Work Again"